All I achieved lately with TP-Link TG-3468 v4.0 / RTL8168H LAN card os SmartOS is that is not working and not showing anymore at all in dladm show-phys , unlike before when it were not instide driver_aliases. Now it is in driver_aliases but not showing as a network card at all anymore.

Also I upgraded to newest image , booted from USB and

/usr/lib/pcie/pcieadm show-devs now gives: bash: /usr/lib/pcie/pcieadm: No such file or directory

.

/usr/lib/pci/pcieadm show-devs works 0:)

it is Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller 10ec 8168 Realtek Semiconductor Co., Ltd. TP-Link TG-3468 v4.0 Gigabit PCI Express Network Adapter

i have found some note that for pci10ec,8168 , the driver in Solaris 11 supports it

I've got a box with a Realtek that works 6/0/0 PCIe Gen 1x1 rge0 RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller

I don't have it cabled up right now, but it shows up as rge0 in`dladm show-link` and `dladm show-phys` output

nillustration, the devil is in the details, need to check the exact chip on it it and PCI ID. I also have 8111 that works fine on the same machine.

makes sense. Mine is the motherboard port on an ASRock z68 Pro3 board.

shows in prtconf with

value='pciex10ec,8168.1849.8168.6' + 'pciex10ec,8168.1849.8168' + 'pciex10ec,8168.6' + 'pciex10ec,8168' + 'pciexclass,020000' + 'pciexclass,0200' + 'pci10ec,8168.1849.8168.6' + 'pci10ec,8168.1849.8168' + 'pci1849,8168,s' + 'pci1849,8168' + 'pci10ec,8168.6' + 'pci10ec,8168,p' + 'pci10ec,8168' + 'pciclass,020000' + 'pciclass,0200'

which is in the illumos HCL

What does yours say the id strings are in `prtconf -v` ?

nillustration, pci10ec,8168 (driver not attached) , bpa.st/7OPQ