ah crap, stable/14 got another API bump. Need to prep for a poudriere mass packages rebuild

is there a tool to resize/move FFS/UFS partitions?

darwin: gpart(8)?

is there a graphical one?

has anyone used the program yacc or byacc and tried to find hte man page for LALR(1) that is referenced in these programs?

voy4g3r2, Closest thing I found was cs.clemson.edu/course/cpsc827/material/LRk/LALR1.pdf

reminds me of my discrete mathematics days.. in university and programming concepts

if you do a man yacc and then you will see a link to LALR(1) which does NOT exist

just reinstalled freebsd, after a few months of pure linux (mint), that was fun and worked much better than my previous experiences, but its good to be back on bsd.

i tried 14, but it crashed hard during install/config - I asked on the forums, but how's it going for folks here?

I'm doing 13.2 for now

decuser: no issues.. what do you mean by crash install/config

kernel panic

was their a particular step in the install, that went boom?

after install, but while I was configuring cups 2nd or 3rd boot

didn't really dig into it... needed my laptop working and kernel panics are not something I've had many of over the years of messing with freebsd

just put 13.2 on and no panics :)

prolly try again, another day, but wait until I get my freebsd legs back and remember how stuff's supposed to work

my hardware's kinda old, maybe? Thinkpad T430 cerca 2013. i5 quad.

works good with 13.2 though

there you go

ddejesus: what's your post in the forums?

rtprio: I'm guessing this: forums.freebsd.org/threads/how-is-14-doing-for-folks.91636

Title: How is 14 doing for folks? | The FreeBSD Forums

alright

i think i'm closer to solving my connectivity problem

seems my FreeBSD server is slowing only TCP traffic down

UDP goes in acceptable, normal speeds

14.1

voy4g3r2: LALR(1) isn't a manual page. LALR(n) is a type of lookahead left-recursive parser with 1-token lookahead.

er, n-token lookahead (where n=1 in this case)

meena, Remilia> alright thanks (holidays response time =) )

trying to set up x and xrdp on a bhyve vm so i can rdp to it. i THINK i got it all configured but it doesn't quite work. xrdp service is running, xrdp-sesman service is running, when i rdp in Xorg starts running, and i got my i3 start script in ~/.config/xrdp/startwm.sh but i don't think it's being invoked for some reason

anyone can haz help pls??

<33

polyex, doesn't xrdp write some log files in your ~/ ?

not seeing any in ~

what about the content of the .xsession file in your ~/

I think this should contain the path to your wm

for instance - running xfce

~$ cat .xsession

mine has

"/usr/bin/startxfce4"

without the quotes

you're talking about the file that's in sesman.ini Globals UserWindowManager right?

because mine's .config/xrdp/startwm.sh

I am using this on a linux PC currently :-) so not quite the same

ah k ya it's different for rdp

xrdp runs a headless x, since it's a vm

I know

I use it to remote into a linux box at work

so the same you are trying to do into a vm basically

in my .config/xrdp/startwm.sh, i put a touch /home/polyex/scriptran so i can see it's being invoked, but the file doesn't get cretaed

created

what about "/var/log/xrdp.log"

ya that has tons of noise in it

even xrdp-sesman.log

polyex: i don't know anything about xrdp, but one thing i'd check is perhaps the script needs to be executable and isn't?

it's 755 :/

good call tho, that snagged me in the past

and the touch /path/to/file should make file be created if startwm.sh is run right?

hmm, i'm getting quite a few clicks with audio playback with a USB audio interface (firefox > pulseaudio > jackd > snd_uaudio)... wonder if i need to increase a buffer somewhere

ah, mac_priority isn't loaded, that probably doesn't help

ListenPort for sesman.ini in man page says path to socket file, but in examples it's a number port

so on 1 bhyve vm, rdp works. another bhyve with same config everywhere i test, doesn't work

hmm xrdp-sesman errors say there is no x server active on display 10

fatal error occurred attempting to start the window manager on display 10, aborting connection

yet when i connect with xfreerdp, i see Xorg spin up

but then it terminates

how to set sound output default to pcm3, but mic rec input to pcm6?

i'm so desperate

how can it be so hard to get rdp working on bhyve guest?

I am having issues

pcm6 mixer USB audio mic is set to pbk (playback I am assuming)

when it should be set to rec src

merry christmas, a great hug, happiness and realizations...

any experts in xrdp xorg? can't get it working in a vm

merry x-mas everyone

u2

bahumbug, etc

meena you an expert on xorg xrdp and bhyve?

can't quuiiite get something cookin

need rdp (xrdp, xorg, bhye) help termbin.com/p83f

polyex: my expertise is mostly in vitualization and server software. not really anything desktop

i bet rhodium would know

doesn't come around much anymore :(

is it useful to set NFS rsize/wsize for NFSv4 mounts? the manual page seems to imply it only helps for UDP

[1/1] Fetching pkg-1.20.9.pkg: 3% 295 KiB 51.8kB/s 04:23 ETA

why fetching is so low ?

meandrain: perhaps the geodns gave you a bad mirror. you can find a list of mirrors at pkg.freebsd.org, and configure the mirror by editing /etc/pkg/FreeBSD.conf as described (i.e., copying it to /usr/local first)

Title: pkg0.nyi.FreeBSD.org

unixwitch: thanks!

(if you're lucky, you might have a better local mirror that's not listed on that page, universities or large ISPs sometimes host those)

do you guys use jurnaling for an external drive? Should I format the drive with newfs -U -j drive_name ?

Do you mean "format a partition"? I wouldn't newfs the whole drive.

(To answer your other question, I don't use UFS at all; my external disk uses ZFS.)

hmm... so I have an application which loads a plugin (*.so) during runtime. it works in the debug build but the release build fails to load the plugin. dlopen() errors:

failed to open library: Shared object "libspdlog.so.1" not found, required by "libplugin.so"

libspdlog.so.1 does indeed not exist. However, ldd shows that my libplugin.so is actually linking to libspdlog.so.1.12 which does exist.

also, debug builds work as expected - any ideas?

Hello, I uninstalled mysql and installed mariadb, but now every time I start or stop the mysql service I get the following errors: bsd.to/VxmW

Title: dpaste/VxmW (Plain Text)

 Its seems to somehow load certain fish scripts (my login shell) but I have no idea why. The mysql user has nologin as a shell, the permissions of /var/db/mysql/ seem to be in order, the service file is unchanged, no other service does this

CamilleSch: try running the rc script with sh -x, and see what command is producing that output (you might want to redirect the output to a file since it's usually quite large)

why is zfs better for an external / usb drive ?

meandrain: checksums to detect data errors (particularly useful on possible poor quality external disks / USB interfaces), copies= feature to allow important data to be recovered even in case of corruption, transparent compression... and why not use ZFS if you have it?

if you have many external drives, you would use the same zfs pool name on all drives ?

probably not, but if you want to do that you can just import with -R

or just rename the pool every time you import it, which seems weird but there's nothing particularly wrong with doing that if you have a stack of 20 disks you randomly use one at a time or something

thank you !

maybe i should do copies; this usb drive is out of warranty i suspect and a scrub turns it to degraded

i feel like copies= has lost a lot of its use cases now almost everything is SSDs (at least in laptops / desktops) but it's probably still useful for this sort of external hdd case

i do wish you could use copies= with a striped pool and still import with missing disks

(use case: desktop with 2+ disks where you want the speed increase of a stripe, but you can set copies=2 on /home to avoid losing important data on disk failure)

hmm, odd static_routes issue after upgrading from releng/14.0 to stable/14: bsd.to/hi2V - this was working fine before, now one of the routes gives 'Invalid argument' on boot

Title: dpaste/hi2V (Plain Text)

but if i add the route by hand after boot, it works fine

That smells like a timing issue. What happens if you move ovpn to the end of static_routes=...?

good evening my fellow freebsd family

EHLO

250-seere Hello rtprio

if I have intel hd4000, what options do I have for driver for x? I tried i915, but it was kinda crappy...

does this channel have any  public logs?

None that I know of

CamilleSch: i thought i remembered a policy of *not* logging, wiki.freebsd.org/IRC but i remembered wrong

Title: IRC - FreeBSD Wiki

rtprio, seere i hope you two are patched for CVE-2023-51764

CamilleSch, There has not been any more comment on your bsd.to/VxmW errors since your last visit to this channel.

Title: dpaste/VxmW (Plain Text)

Seeing those fish shell errors makes me think that either root's shell has been changed to fish or that some use of "su" rather than "su -" caused undesirable user environment leakage into the root environment.

The "service" command should protect against such things but in your paste those were certainly unexpected errors to see.