-
unixery-u1Hi, I've installed OmniOS on a Fujitsu server and linke to use ipmitool. I cannot access IPMI via device, but only via IP. Is this the expected behaviour? See: paste.opensuse.org/pastes/25cc276ac378
-
neuroserveunixery-u1 - what kind of fsc box is it? I use old ones (like primergy s7 and s8) in our lab and "ipmitool sensor" gives me some output - this is on smartos, though
-
unixery-u1it's a quite old TX1320 M3 (Xeon v6 generation)
-
unixery-u1I wonder if the ipmi devices should/could be available in illumos...
-
unixery-u1it has FUJITSU ServerView® iRMC S4
-
neuroserveunixery-u1 - do you have the latest firmware on the irmc?
-
unixery-u1yes, updated both BIOS and IRMC to the latest version. But it may be a licensing thing...
-
neuroserveunixery-u1 - I got a rx200s8 here - whith Firmware 9.62F from 2020. it says I have permanent license keys for KVM and MEDIA installed
-
unixery-u1Firmware Version 9.69F from 2022, but no licenses installed
-
neuroserveunixery-u1 - I'm not sure where to look for additional relevant information regarding the configuration :-)
-
neuroserveunixery-u1 - do you have an ipmi-device under /dev at all?
-
unixery-u1no, there is no ipmi device. I guess I should boot a Linux Live USB and have a look there first
-
neuroserveunixery-u1 - I'm not sure - I've not configured the irmc. I remember times, when we had to attach a keyboard to the box in order to use the serial console of the irmc, though...
-
andyfunixery-u1 - have you installed the "driver/ipmi" package? It doesn't look like it's part of the default installation set.
-
unixery-u1andyf: that's it :-)
-
unixery-u1installed driver, devices appeared, works...
-
unixery-u1i was pkg searching for ipmitool and missed the driver
-
gitomat[illumos-gate] 16594 SATL confuses lengths resulting in bad resid values -- Jason King <jason.brian.king⊙gc>
-
jbkhrm..
-
jbkanyone seen i40e_aq_add_veb fail with I40E_ERR_ADMIN_QUEUE_ERROR ?
-
jbkit looks like rpz added the code that makes the function call that's failing...
-
tozhuHello experts, to run illumos, should disable NUMA in UEFI/BIOS setting?
-
tozhuand I see there is a little different of /kernel/drv/sd.conf, in smartos it defines sd-config-list for some disk, should set to 4096 for the block size for all disks?
-
tozhubest wishes