05:35:54 <nikolam> " diskinfo | awk 'NR == 1 || /^USB/ { print }' " from https://wiki.smartos.org/remotely-upgrading-a-usb-key-based-deployment/ does not actually gives any disk info...
05:36:09 <nikolam> issuing ' diskinfo ' itself does 
05:37:01 <nikolam> yet without SmartOS boot USB flash on the list. 
05:38:17 <nikolam> Unless USB key popped out , physically ;P 
05:40:44 <pjustice> On the one machine I have a USB stick in, it's SCSI
05:40:52 <pjustice> SCSI    c1t0d0                  SanDisk  Cruzer Fit          7.45 GiB   yes no 
05:53:16 <nikolam> yes, I have 2 USB sticks on that machine and onw is showing as SCSI (one I plugged in for Intel AMT/firmware upgrade) and SmartOS boot that doesn't shows up, so I suppose it is plugged out. 
05:54:34 <nikolam> Btw would love to recollect, how to distinguish if SmartOS is booted from the loader on the zones pool/hard drive or booted from USB flash 
07:23:48 <nikolam> I just checked on the other machine/smartos install. Definatevly, diskifno not displaying USB flash drive info at all . And it is definitively bootying form USB flash, since uname -a shows SmartOS image active as older then available on piadm from HDD, so booted from USB flash
10:31:18 <dbrooke> diskinfo is missing the USB flash boot device on one of my systems too and I just checked that it was plugged in, another 2 show it fine but they're a different hardware and flash type, all running joyent_20240711T031348Z
10:34:34 <wiedi> dbrooke: have you tried unplugging and plugging-in-again? There's a bug where some usb drives don't show up if they have been plugged in from the system start
10:37:41 <dbrooke> yes, I did replug it and still not showing
10:38:54 <wiedi> hm, no idea then - sorry
10:42:58 <dbrooke> I only checked out of curiosity because of the previous mention and this is the first time I've noticed it missing
10:52:15 <dbrooke> there's nothing for it in /dev/dsk/ so the diskinfo command is probably fine in itself