00:21:45 xmerlin that disk had a zpool with smartos before? I remember having the same problem and sdc-factory reset help if I'm not mistaken or you could try pxe? 12:26:36 neirac, no the machine is new and the disk is empty 12:29:36 I can boot smartos but there is a strange error https://pasteboard.co/Ui6NY056aFF8.jpg 13:02:29 xmerlin do you see the network interfaces on the host? dladm show-phys or sysinfo looking at the Network Interfaces tag 13:03:57 I cannot see the network interface and its quite strange ...I'm using this machine with freebsd 13:28:06 xmerlin which nic does the machine has? is supported by SmartOS 13:28:46 intel I226 13:32:36 a revision of i225 13:42:40 xmerlin maybe danmcd has more information or bahamat I don't see that in illumos hcl 14:03:05 i'm 90% sure we don't support that 14:10:00 :( 14:39:08 the auditd is probably related to the network/physical 14:39:38 the logs from network/physical (`svcs -L network/physical` should give you the pathname) 14:39:43 would be good to see 14:45:39 if it's just a revision, i think we have a driver for i225, right? 15:04:14 jbk, https://pasteboard.co/lx9AMbJBXRQa.jpg and https://pasteboard.co/8cVaiHSEo1hN.jpg 15:17:03 yeah, so i'm guessing 'dladm show-phys' is probably not showing the interface 15:26:44 I225/I226 are unsupported. We need the igc driver. 15:27:23 oh we don't have it at all.. so more work than just updating the driver 15:37:57 Yes. 15:47:36 i'd love to port it from freebsd, but ENOTIME 16:06:34 Ironically it's actually still an e1000g, but Intel upstream decided on a fresh driver. 16:06:52 (The MAC is the same and the descriptor layout is mostly the same, just not what Intel decided to do) 16:51:02 and probably not something likely to be on systems seen at $WORK 16:51:05 if it's just 1gb 16:51:35 (otherwise I could probably have a case for $WORK to port it as opposed as a personal thing) 16:53:16 It's 2.5G. 17:04:40 jbk: $work still mnx in your case? 17:05:56 no, i've never worked for mnx 17:49:51 jperkin: interesting, I'm hitting this https://bugzilla.samba.org/show_bug.cgi?id=14685 with smbd 4.18.6 17:50:18 http://p.ip.fi/mCwG 17:50:53 I wondered why dmesg takes so long, turns out /var/adm/messages is 12G in size due to that message :-D 17:56:14 jbk oops, It gets confusing from time to time with people changing $work 18:44:31 rmustacc: IIUC I225 is 2.5, and I226 is 5... right? 18:44:50 Nope... just checked, sorry. 18:44:53 2.5 18:49:25 No, both are 2.5G. 18:49:36 There's not a lot of consumer 5GBASE-T/N right now. 19:05:36 AIUI one can use cat5e for 2.5. I'm not as sure about cat5e for 5. Also AIUI one can *try* to use it for 10, but it's dicey at best. 19:05:47 * danmcd has cat5e in his home... 19:09:14 mine (not quite done yet) has cat6.. just need to find a switch that has at least a couple of 2.5gb ports (for wireless) and a couple of 10gb ports (for storage/file serving) 19:27:46 I've done a lot of 10G over Cat5e in the lab and surprisingly had no problems. Cables I made too. 19:33:26 jbk end user level switch? 19:35:52 jbk I was checking on netgear, well partly because I also got orbi 20:07:00 something for home 20:07:34 not sure how many ports though (need to go back and count the # of drops) 20:08:07 ideally, I'd want every drop plugged into the switch, that way I can just activate/deactive/configure the ports without having to mess with cross connects 20:08:44 probably less of an issue w/ the house, but my experience is not doing that is how you end up with a rat's nest of cables at your patch panels 21:40:08 i also have used 10G over cat5e, seems fine for shortish (~25M) runs 21:41:43 Oooh, 25M is far less than any cable length I have in my house. 21:43:26 Okay, maybe not FAR less (thinks about 1-2 feeds) but not more. 22:00:39 only one of the runs the contactors put it gave me trouble when testing, but that one is just bad even at 10Mbit 22:05:01 if someone(tm) would port igc I could get my hands on hardware for testing 22:12:06 danmcd: Dan, I'll have the Dell PowerEdge 750xs available for testing from tomorrow until end of week. (with that Intel(R) Xeon(R) Silver 4310 CPU ) Any output you'd be interested or just generic works fine/problem with latest smartos would suffice? 22:13:27 This is for ucode update testing? 22:13:54 danmcd: yup, the microcode we talked about here https://log.omnios.org/smartos/2023-11-14 22:26:07 If you've run pre-ucode PIs, having the output of "ucodeadm -v" would be nice. Then you can compare it to post-ucode PIs. 22:39:15 danmcd: so starting with 20231102T000310Z and upgrading to 20231116T064739Z ? 22:43:59 Yes. Exactly that. 22:44:07 SHould see changes. 22:44:28 I'm out for dinner now. Hope *not* to be back after, but that depends on some tests I'm running. 22:52:31 danmcd: talk to you later and have a nice evening.