06:31:31 <gonzosysadm[m]> <bahamat> "gonzosysadm: I don't understand..." <- right now, the latest 13.x-RELEASE :) there should be ideally one image for each major release (12, 13, etc), and then keep at least one major release image aroud -- so for example, 12.x and 13.x now (but we only have 12.x)
06:32:08 <gonzosysadm[m]> 11.x no one uses anymore, but 12.x yes. when 14.0 comes out, many will stick to 13, but 12 won't be supported much longer. etc
07:44:05 <gonzosysadm[m]> i'm not getting ip6 connectivity on a new server from a zone, all i included int he nic definition in the zone file is the nictag, and the v6addr in ips: [] (with the prefixlen at the end). and then i ran route -p add -inet6 default $gw from the zone .. but it's not working. no further configuration. am i missing something obious here or there might be more to the network configuration in this provider than meets the eye?
07:48:34 <nbjoerg> gonzosysadm[m]: do you use slaac?
07:48:54 <nbjoerg> and RA?
07:49:01 <gonzosysadm[m]> nope
07:49:02 <nbjoerg> or fully manual configuration?
07:49:09 <gonzosysadm[m]> fully manual
07:49:18 <nbjoerg> ok, can't help with that then. never did that
07:50:51 <nbjoerg> for netbsd the only challenging part is disabling duid-based adress generation in dhcpcd
07:51:46 <nbjoerg> otherwise I'm just using addrconf all the time and let RA handle the routing
07:52:44 <gonzosysadm[m]> well, isee the ip assigned in the zone, i can ping the default gateway, i have set the default gateway, i can ping the global zone from the zone, its just internet stuff that won't work
07:52:46 <gonzosysadm[m]> not pings, not dns, not anything 
07:55:07 <nbjoerg> snoop showing anything missing?
07:55:11 <nbjoerg> (from the GZ)
08:09:12 <gonzosysadm[m]> how do you mean?
09:34:10 <nikolam> Should ' prtvtoc /dev/rdsk/c1t1d0s0 | fmthard -s - /dev/rdsk/c1t0d0s0 ' and ' zpool attach -f zones c1t1d0 c1t0d0 ' be enough for Smartos machine to boot regularly again after restart? 
09:34:53 <nikolam> Or additional re-install of loader should be needed too? (both drives resilvered with previously detaching and attaching one and another, on working system. 
09:35:47 <nikolam> Or should I re-install loader, just in case? Will loader be present after resilvering.. ?
09:37:56 <nikolam> system is booted from HDs (piadm) . Maybe piadm will re-install loader with 'activate ' command and that will be effective on both HDs, or not, it needs to be installed on both HDs where system boots from, separately?
09:45:18 <nikolam> Also is it only me or downloading latest USB image of Smartos is rather very slow at the moment?
09:59:32 <nikolam> Now is a bit faster, but still less the 1MiB /s, or more like half of it.
11:52:08 <nikolam> USB smartos image finishes download, but it seems MD5SUM is not right.. 1d79e8d36ea460b138ad25293d206243 smartos-20221020T001410Z-USB.img.gz and for smartos-latest-USB.img.gz and MD5 should be 1d79e8d36ea460b138ad25293d206243 ?
12:12:16 <nikolam> btw, piadm bootable confirmed it is bootable and works after restart